Page 356 - Demo

Brand - Designates =Foster or =Breco Part– 356 – www.zsi-foster.comWARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. T-Valve, 3-Way Sleeves, Drain Cocks & Garden Hose Couplings3-Way Sleeve w/Optional Lockout - FosterT-Valve Series Plug Valve - Breco \Way Sleeve ValvePart No. NPT Description3W125 1⁄ 8\Brass 3W250 1⁄4\3W375 3⁄ 8\3W500 1⁄ 2\\Sleeve Valve LockoutPart No. NPT DescriptionLO250 1⁄4\Valve LockoutWith Chain LO375 3⁄ 8\LO500 1⁄ 2\• Provides low cost ON-OFF-EXHAUST operation• Slide the sleeve to the ON position. Exhaust ports are closed, valve is open. Reversing the sleeve, opens exhaust ports, shuts off flow• Ports covered for protection against exhaust flow• Body detent secures sleeve position• Valve with lockout complies with OSHA Standard 29 CFR, Part 1910Rated Pressure: to 200 PSIGTemperature: –25° to +200°FInlet: 1⁄4\Outlet: 1⁄4\Rated Pressure: 3,000 PSIGFlo 5 GPM (water at 100psig)Seat Material: EPDM or Viton(Contact ZSi-Foster for seal options)Temperature: EPDM: -40° to +300°FViton: -15° to +400°FFemale x MaleT-Valve Part No.NPTFxM DescriptionB-7500-2 1⁄4\Female x MaleQuarter-Turn Valve Brasswith EPDM Seal Male x MaleT-Valve Part No.NPTMxM DescriptionB-7500-2MXMV 1⁄4\Male x MaleQuarter-Turn Valve Brasswith Viton SealMale Pipe ThreadPartNo. SizeDC-1 1⁄ 8\DC-2 1⁄4\DC-3 3⁄ 8\Drain Cocks - Brass Fittings - BrecoThe design of the drain cock uses metal-to-metal seal which requires only hand tightening to assure positive leak-proof performance.Materials: Brass bodies/steel handles except where noted.Pressure: 150 psig max. (does not include hose or plastic tubing).Used With: Copper, aluminum, steel hose and plastic tubing where applicable.Temperature: -65° to +250°FConformance: Designed for automotive or industrial use. Not intended for natural gas, LPG, nuclear or aircraft application, except as noted.• Brass and stainless steel construction for heavy duty service.• Durable 4-ball locking mechanism for secure connections.• Temperature-resistant BUNA seals for a leak-free service life.• Provides secure nipple-to-hose clamping. Made from bar stock.The Garden Hose couplings are used anywhere water hoses are connected and disconnected frequently. They are used on a wide variety of applications including garden hoses, wash down system, and mobile water tank lines. The non-valved design permits maximum flow with minimum pressure drop.Specifications:Rated Pressure: 200 psigTemperature Range (BUNA seals): -40° to +250° F. SocketPart No. SizeThread SizeNHB-7455 3⁄4\3⁄4-111⁄ 2Garden Hose Couplings - Breco PlugPart No. SizeThread SizeNHB-7465 3⁄4\3⁄4-111⁄ 2