Page 204 - Demo
P. 204


                                    – 204 – www.zsi-foster.comWARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Standard Series Beta Clamps• Cushions are Polypropylene (Green Color)• Recommended for systems with less than 1,500 psi (103 bar) without dynamic loads.• Use for standard hydraulics, general pipe construction, electrical cables, and general duty piping applications subject to moderate levels of shock and vibration.• Aluminum cushions are used in higher heat applications up to 500°F (260°C).INSTALLATION - Refer to pages 253 - 256 for complete installation guide.S CAssembly TypesZ B R SISizeA2A1H11.2\30mm0.12\0.20\H2A30.12\ThickSteel with Aluminum CushionBeta Clamps - StandardGroup PartNo. *TubeSizePipeSizeMetricSizeDimensions - inch (mm)BoltA1 A2 A3 H1 H2 S1S1004 1⁄4\– –0.78\(20)1.34\(34)1.41\(36)0.62\(16)1.25\(32)1⁄4\x 11⁄4\S1006 3⁄8\– –SM1006 – – 6mmS1007 – 1⁄8\–SM1008 – – 8mmSM1012 – – 12mm S2S2008 1⁄2\– –1.02\(26)1.57\(40)1.65\(42)0.76\(19.5)1.54\(39)1⁄4\x 13⁄8\S2009 – 1⁄4\–S2010 5⁄8\– –S2011 – 3⁄8\–SM2014 – – 14mmSM2015 – – 15mmSM2018 – – 18mm S3S3012 3⁄4\– –1.29\(33)1.96\(50)2.04\(52)0.80\(20.5)1.61\(41)1⁄4\x 11⁄2\S3014 – 1⁄2\–S3015 7⁄8\– –S3016 1\.000) – –SM3020 – – 20mmSM3025 – – 25mm S4S4017 – 3⁄4\– 1.57\(40)2.28\(58)2.36\(60)0.94\(24)1.88\(48)1⁄4\x 13⁄4\S4018 11⁄8\– –SM4030 – – 30mm S5S5020 11⁄4\– –2.04\(52)2.75\(70)2.83\(72)1.25\(32)2.52\(64)1⁄4\x 21⁄2\S5021 – 1\.315) –S5024 11⁄2\– –S5027 – 11⁄4\–SM5035 – – 35mm S6S6028 13⁄4\– – 2.59\(66)3.38\(86)3.46\(88)1.41\(36)2.83\(72)1⁄4\x 23⁄4\S6030 – 11⁄2\–S6032 2\– – S7S7038 – 2\–3.70\(94)4.75\(121)4.81\(122)2.00\(51)4.05\(103)1⁄4\x 4\S7036 21⁄4\– –S7040 21⁄2\– –S7044 23⁄4\– –S7048 3\– –SUFFIX*For additional sizes contact factory.Note: Add assembly type to part number. Example: S1004S-SS provides thecomplete assembly as shown with stainless steel components.NOTE: SM (metric) only available in Steel with Polypropylene (green) cushion.Components Cushion Examplenone Steel Polypropylene (green) S1004S-AL Steel Aluminum S1004S-AL-SS Stainless Steel Polypropylene (green) S1004S-SSSteel withPolypropylene Cushion
                                
   198   199   200   201   202   203   204   205   206   207   208