Page 247 - ZSi-Foster Product Catalog

Conduit and Cable Support

Standard Finish: Silva-Guard (SG)

FHS CCP • Supports conduit from beam flanges.
Flange Clip Side Mount • Flange thickness range stamped on part. Introduction
with Conduit “Push In” Clip • Only a hammer required for installation.
• Material: Spring Steel
• Finish: Silva-Guard
Channel

Part Min. - Max. Conduit Size
No. Flange Thickness
1
FHS24CCP8 1 ⁄8" - ⁄4" (3mm - 6mm)
1
FHS58CCP8 5 ⁄16" - ⁄2" (8mm - 13mm) 1 ⁄2" EMT Channel Nuts & Hardware
3
FHS912CCP8 9 ⁄16" - ⁄4" (14mm - 19mm)
1
FHS24CCP12 1 ⁄8" - ⁄4" (3mm - 6mm)
1
1
FHS58CCP12 5 ⁄16" - ⁄2" (8mm - 13mm) 3 ⁄4" EMT, ⁄2" Rigid
3
FHS912CCP12 9 ⁄16" - ⁄4" (14mm - 19mm) General Fittings
1
FHS24CCP16 1 ⁄8" - ⁄4" (3mm - 6mm)
3
1
FHS58CCP16 5 ⁄16" - ⁄2" (8mm - 13mm) 1" EMT, ⁄4" Rigid
15 lbs. FHS912CCP16 9 ⁄16" - ⁄4" (14mm - 19mm)
Brackets
3
FHV CC • Supports pipe and conduit from bar
Flange Hanger with Conduit Clip joist's and "C" purlin's.
• Compatible with many industry standard Beam Clamps
installation tools.
1
• ⁄16"- ⁄4" flange thickness range.
1
Pipe & Conduit Supports
• Material: Spring Steel
• Finish: Silva-Guard
Part Min. - Max. Conduit Size
No. Flange Thickness

FHV3CC6 * 3 ⁄8" Flexible Conduit
1 ⁄16" - ⁄4" 1 3 Electrical Fittings
1
FHV3CC812 ⁄2" & ⁄4" EMT, Rigid
FHV3CC16 1" EMT, Rigid
* Not a UL Listed Product 30 lbs.
Spring Steel

CFC
Conduit Clip to Flange
Concrete Inserts

Part Flange Cable
No. Thickness O.D. Rooftop Supports
3
CFC2D 1 ⁄16" - ⁄16" 0.46 - 0.56
CFC4D 3 ⁄16" - ⁄32" 0.46 - 0.56 • Supports flexible conduit and cable from flanges.
9
CFC4E 0.50 - 0.72 • Simple Push-in clip design.
CFC8D 5 ⁄16" - ⁄2" 0.46 - 0.56 • Material: Steel Technical Data
1
CFC8E 0.50 - 0.72 • Finish: Electro-Galvanized
www.zsi-foster.com – 247 –

WARNING: Cancer and Reproductive Harm Warning. For more information go to www.P65Warnings.ca.gov.