Page 276 - ZSi-Foster Product Catalog

Concrete Inserts

Standard Finish: Pre-Galvanized (PG)

Spot Concrete Insert Concrete Insert Nut

2"
3 ⁄8" 51mm 15
5
92mm A ⁄32"
12 Ga. 12mm

1
5
1 ⁄8" Knockout 1 ⁄4"
41mm 15 ⁄16" 32mm
24mm
23 Ga.
Insert Nut CIN Tabs

Designed to be used with spot concrete insert nuts
5
7
The ⁄8" x 1- ⁄8" knock-out is removed after concrete pour. The spot
concrete insert nut is placed in the slot, and then the rod is screwed into
the nut. The nut is secured in place by turning the rod. Lateral adjustment Tapped “A”
is made by loosening the nut and relocating. When selecting rod size, FLORIDA STRUT VERSABAR WESANCO Size
refer to "Load Ratings" of Thread Hanger Rods" chart on page 82. CIN 0025 W7024 1 ⁄4"-20
CIN 0037 W7025 3 ⁄8"-16
Allowable Load CIN 0050 W7026 1 ⁄2"-13
FLORIDA STRUT VERSABAR WESANCO
Lbs. (kN) CIN 0062 W7027 5 ⁄8"-11
CI -- W7000 600 (2.67 kN) CIN 0075 W7028 3 ⁄4"-10
Load based on adequate concrete CIN 0087 W7029 7 ⁄8"- 9

Spot Concrete Insert Concrete Insert Nut

13
3 ⁄16"
97mm
1
1
1 ⁄2" 1 ⁄4" A
38mm 32mm
1 ⁄4"
1
32mm
29 ⁄32"
5
1 ⁄8" 23mm
41mm 2"
51mm
Blank
Tapped
FLORIDA STRUT VERSABAR WESANCO Size
Size
“A”
-- VCN25 -- 1 ⁄4"-20
1 ⁄4" (6mm)
VCN31 5 ⁄16"-18
-- VCN37 -- 3 ⁄8"-16 3 ⁄8" (10mm)
VCN37-RP 3 ⁄8"-16 - Pipe Tap
Load Rating in 3,000psi
FLORIDA VERSABAR WESANCO min. concrete -- VCN50 -- 1 ⁄2"-13
STRUT 1
Lbs. (kN) VCN50-RP 1 ⁄2"-13 - Pipe Tap ⁄2" (13mm)
-- VC1 -- 1,300 (2.67 kN) -- VCN62 -- 5 ⁄8"-11
Load based on adequate concrete -- VCN75 -- 3 ⁄4"-10
Hole Diameter: ⁄16" (14mm); Hole Spacing - From End: ⁄16" (21mm); Hole Spacing - On Center: 1- ⁄8" (48mm); Width: 1- ⁄8"(41mm); Thickness: ⁄4" (6mm)
1
13
7
5
9
– 276 – www.zsi-foster.com
WARNING: Cancer and Reproductive Harm Warning. For more information go to www.P65Warnings.ca.gov.