Page 309 - ZSi-Foster Product Catalog

Bolted Channel

Attachment Information

Introduction

Shallow channel bolted thru from
inside to backing plate with ⁄2" dia. Channel
1
Allen head bolt and washer; hex
nut behind.
Channel Nuts & Hardware

Shallow channel bolted thru from
1
face to backing plate with ⁄4"
1
face fitting and ⁄2" hex bolt; hex Deep style channel bolted thru from inside to General Fittings
1
nut behind. beam flange utilizing ⁄2" dia. hex bolt washer
(inside channel),beveled washer and hex nut
on top of flange.
Brackets

Beam Clamps
1- ⁄8" Deep channel type bolted
5
thru from inside to backing Do not over tighten faced thru bolts.
3
plate with ⁄8" dia. hex bolt, and Utilize bolting security measures
Pipe & Conduit Supports
washer; hex nut behind.
to prevent accidental loosening.

OVER TIGHTENING CAUTION
Over tightening "bottoming" a threaded fastener against the bottom of a channel section will Electrical Fittings
result in serious damage and possible failure. Use proper length fasteners and leave a slight
gap; fastener face to channel surface.
Spring Steel

Concrete Inserts

Rooftop Supports

Gap

1
Shallow channel with ⁄4" thick 1- ⁄8" Channel with ⁄4" fitting and 1- ⁄8" Deep Channel with ⁄4"
5
1
1
5
15
fitting and ⁄16" max. bolt length. 1- ⁄4" working length bolt. thick fitting and ⁄2" all thread. Technical Data
1
1
www.zsi-foster.com – 309 –