Page 153 - ZSi-Foster Product Catalog

Beam Clamps

Standard Finish: Electro Galvanized (EG)

Formed Steel Beam Clamp
7
Maximum flange thickness ⁄8" 22mm Introduction
Set Screw
Included FLORIDA Allowable
STRUT VERSABAR WESANCO A B Set Screw Load Lbs.
(kN) (ea.)
7 ⁄8" B -- VX7002A W5721 1 ⁄4"-20 Channel
22mm 2 ⁄2" -- VX7003A W5722 5 ⁄16"-18 1 ⁄8" 3 ⁄8" x 1- ⁄2" 650
1
1
64mm 3 (3mm) (2.89 kN)
Tapped BC150037 VX7004A W5723 ⁄8"-16
Hole BC160037 VX7005A W5724 3 ⁄8"-16 3 ⁄16" 1,100
Size A 1
2 ⁄2" BC150050 VX7006A W5725 ⁄2"-13 (5mm) 1 ⁄2" x 1- ⁄2" (4.89 kN) Channel Nuts & Hardware
1
1
64mm 13 ⁄16" BC160050 VX7007A W5726 1 ⁄2"-13 1 ⁄4" 1,600
21mm BC150062 VX7008A W5727 5 ⁄8"-11 (6mm) (7.12 kN)
BC160062 VX7009A W5728 5 ⁄8"-11 5 ⁄16" 2,400
Bottom Rod against Beam (recommended) 5 ⁄8" x 1- ⁄2"
1
-- VX7010A W5729 3 ⁄4"-10 (8mm) (10.68 kN)
General Fittings
Formed Steel Heavy Duty Beam Clamp
3
5
For ⁄4" thru 1- ⁄8" (19 thru 41mm) flange thickness
Set Screw
Included Brackets
FLORIDA VERSABAR WESANCO A B Set Allowable
Load Lbs.
STRUT Screw
(kN) (ea.)
1 ⁄32" 3 ⁄8" -- VX7011A W5731 1 ⁄4"-20
21
5
42mm 92mm -- VX7012A W5732 5 ⁄16"-18 1 ⁄8" (3mm) 3 ⁄8" x 2" 800 Beam Clamps
BC170037 VX7013A W5733 3 ⁄8"-16 (3.56 kN)
Tapped B -- VX7014A W5734 3 ⁄8"-16 3 ⁄16" 1,300
Hole 1 ⁄2" x 2"
Size A BC170050 VX7015A W5735 1 ⁄2"-13 (5mm) (5.78 kN)
1
3 ⁄4" -- VX7016A W5736 1 ⁄2"-13 1,900
83mm BC170062 VX7017A W5737 5 ⁄8"-11 1 ⁄4" (6mm) 1 ⁄2" x 2" (8.45 kN) Pipe & Conduit Supports
13 ⁄16" 5 5
21mm -- VX7018A W5738 ⁄8"-11 ⁄16" 5 ⁄8" x 2" 2,800
Bottom Rod against Beam (recommended) -- VX7019A W5739 3 ⁄4"-10 (8mm) (12.46 kN)
Electrical Fittings
Beam Clamp Anchor Strap
Straps can be used as a secondary method of securing clamp to
beam. After inserting strap and mounting clamp to beam, excess
length is then bent back up and over beam. Spring Steel

1
1 ⁄4" FLORIDA STRUT VERSABAR WESANCO W * L
L (Max)
BC130600 -- -- 6" (152mm) 9" (228mm)
-- VX1006 WBC0906 7" (178mm) 10" (254mm) Concrete Inserts
BC130900 VX1007 -- 9" (228mm) 12" (305mm)
-- VX1008 -- 11" (279mm) 14" (356mm)
BC131200 -- -- 12" (305mm) 15" (381mm)
-- VX1009 -- 13" (330mm) 16" (406mm) Rooftop Supports
BC131500 VX1010 -- 15" (381mm) 18" (457mm)
W * For beam flange thickness greater than ⁄4" (19mm) use next larger flange width size.
3
Technical Data

Opposing style clamps uniform loads are based on being used in pairs, installed against the flanges of the beam.
It is recommended that the beam be dimpled at set screw contact location.
www.zsi-foster.com – 153 –

WARNING: Cancer and Reproductive Harm Warning. For more information go to www.P65Warnings.ca.gov.