Page 155 - ZSi-Foster Product Catalog

Beam Clamps

Standard Finish: Electro Galvanized (EG)

Wide Mouth Rod Suspension Beam Clamps
Accepts up to 3" Thick Flanges Introduction

• Material: Malleable Iron
• Finish: Bright Zinc Set Screw
• Maximum flange thickness of 3" (76mm)
Channel

Up to 3" (76mm)
FLORIDA VERSABAR WESANCO Rod Set Screw Max Work Load Flange Thickness Channel Nuts & Hardware
STRUT Size Size lbs kN
1
-- VX9004WM -- 1 ⁄4"–20 5 ⁄16"-18 x 2 ⁄2" 200 (0.89kN) Rod Size Rod Size
1
-- VX9005WM -- 3 ⁄8"–16 3 ⁄8"–16 x 2 ⁄2" 300 (1.33kN)
General Fittings
-- VX9006WM -- 1 ⁄2"–13 1 ⁄2"–13 x 2 ⁄2" 400 (1.78kN)
1
Rod Suspension Beam Clamps with Retainer

Stock Thickness on retainer strap is 14 ga. .075" (1.91)
1 1
Set Screw Diameter is ⁄2"-13 x 1- ⁄4 Brackets
Includes: 2 ⁄2"
1
1
Clamp & Set Screw, J-Hook, & ⁄2"-13 Hex Head Cap Screw 64mm
1
( ⁄2" Diameter threaded rod sold separately).
2 ⁄4"
1
57mm Beam Clamps
Design B
FLORIDA VERSABAR WESANCO Rod B Beam C Flange
STRUT Size A Thickness Width Load lbs
(kN)
C Pipe & Conduit Supports
4" thru- 6"
-- VX9000 --
(102 thru 152mm)
A
7" thru 9"
-- VX9001 --
13
3 ⁄8" to ⁄16" (178 thru 229mm) 400
1 ⁄2"–13
-- VX9002 -- (9 to 21mm) 10" thru 12" (1.8kN)
(254 thru 305mm) Retainer is supplied flat. Hammer end of Electrical Fittings
13" thru 15" retainer up and over beam after clamp is
-- VX9003 --
(330 thru 381mm) securely attached to beam flange
Spring Steel
Strut to Beam Clamp C-Type, Parallel
3 ⁄8" 10mm material thickness 1 ⁄2" - 13
Set Screw
2 ⁄2" Concrete Inserts
1
64mm
2-Holes
9 ⁄16" (14mm) 2" Rooftop Supports
51mm
FLORIDA STRUT VERSABAR WESANCO
BC22 VX7002AL W5714

Opposing style clamps uniform loads are based on being used in pairs, installed against the flanges of the beam. Technical Data
It is recommended that the beam be dimpled at set screw contact location.
www.zsi-foster.com – 155 –

WARNING: Cancer and Reproductive Harm Warning. For more information go to www.P65Warnings.ca.gov.