Page 159 - ZSi-Foster Product Catalog

Beam Clamps

Standard Finish: Electro Galvanized (EG)

Mini Steel Beam Clamps Strut to Beam Clamp Z-Type
3 ⁄8" 10mm material thickness Introduction

1 ⁄4" Set Screw 1 ⁄2" - 13
1
1 ⁄4"
Included
1
32mm Set Screw
32mm
1 ⁄8" Max Flange Channel
5
41mm Thickness
1" (25mm)
1 ⁄4"-20 Dia.
1
(all holes) 1 ⁄2"
13mm 2" Channel Nuts & Hardware
Use in Pairs 51mm
FLORIDA STRUT VERSABAR WESANCO Design Load FLORIDA STRUT VERSABAR WESANCO
75 Lbs. BC30 VX7106A W5712
BC92 VX7049A --
(0.34 kN) General Fittings
Strut to Beam Clamp Z-Type
3 ⁄8" 10mm material thickness
Brackets
Use in Pairs

Beam Clamps

Design Uniform
Load Lbs. (kN) Must be
FLORIDA STRUT VERSABAR WESANCO Includes used in pairs 1 ⁄8"
3
5
1- ⁄8" - 1- ⁄8" - (34.9)
5
12 Ga. 14 Ga.
Clamp and Pipe & Conduit Supports
-- VX7101S -- 600 500
Set Screw
-- VX7101A -- All Hardware (2.67 kN) (2.22 kN)
Load capacity when used in pairs
Electrical Fittings
Strut to Beam Clamp
Notched Type

Clamp Requires
1
1 ⁄2" x 1 ⁄2" Hex Head Spring Steel
1 ⁄2" Cap Screw and
13mm 1 ⁄2" Channel Nut
Not Included.
Design Uniform Concrete Inserts
Load Lbs. (kN) (Use in Pairs)
FLORIDA STRUT VERSABAR WESANCO Includes
5
1- ⁄8" - 1- ⁄8" -
5
12 Ga. 14 Ga.
7
Without 1 ⁄8"
BC70 VF2102 W5713
Hardware 600 500 48mm 1 ⁄4" Rooftop Supports
With (2.67 kN) (2.22 kN) 6mm
-- VF2102HW --
Hardware
Load capacity when used in pairs
Opposing style clamps uniform loads are based on being used in pairs, installed against the flanges of the beam. Technical Data
It is recommended that the beam be dimpled at set screw contact location.
www.zsi-foster.com – 159 –

WARNING: Cancer and Reproductive Harm Warning. For more information go to www.P65Warnings.ca.gov.