Page 157 - ZSi-Foster Product Catalog

Beam Clamps

Standard Finish: Electro Galvanized (EG)

Malleable Iron Universal
Beam Clamps 1 ⁄4" x 1 ⁄4"
1
Set Screw Introduction
1" 9
25mm ⁄32" (7 mm)
Through Hole
• Material: Malleable Iron
• Finish: Electrogalvanized (EG) Channel
9
5
• Maximum flange thickness of ⁄8" (16mm) 1 ⁄16"
RS 40mm
FLORIDA VERSABAR WESANCO Rod Size W1 Max W2 Max
STRUT (RS) Load Load RS 5 ⁄8" 5 ⁄8"
100 250 (16mm) (16mm) Channel Nuts & Hardware
BC910025 -- BC91025 1 ⁄4" – 20 W1 W2
(0.44kN) (1.11kN)
The threaded hole on the back side of the clamp is not load rated.
Do not over tighten set screw

Malleable Iron Universal Beam Clamps
1
L 3 ⁄8" x 1 ⁄2" (38mm) General Fittings
Set Screw
NOTE: DO NOT
OVERTIGHTEN
Brackets
• Material: Malleable Iron
• Finish: Plain (PL),or Electrogalvanized (EG) H D
5
• Maximum flange thickness of ⁄8" (16mm)
RS
B
W Beam Clamps
Rod Size Max Load Max Pipe
FLORIDA STRUT VERSABAR WESANCO B L H D
(RS) W lbs Size
BC800037 -- BC8037 3 ⁄8" - 16 350 (1.56kN) 4" 7 ⁄8" 1 ⁄16" 1 ⁄2" 1 ⁄2"
1
5
BC800050 -- BC8050 1 ⁄2" - 13 470 (2.09kN) (102mm) (22mm) (33mm) (38mm) (13mm) Pipe & Conduit Supports
1
3
3
BC800062 -- BC8062 5 ⁄8" - 11 550 (2.45kN) 5" (127mm) 1 ⁄8" (29mm) 1 ⁄4" (45mm) 1 ⁄4" (45mm) 5 ⁄8"
BC800075 -- BC8075 3 ⁄4" - 10 700 (3.11kN) 6" (152mm) 1 ⁄8" (35mm) 1 ⁄8" (48mm) 1 ⁄8" (48mm) (16mm)
3
7
7
Wide Mouth Malleable Iron L 3 ⁄8" x 2" (51mm) Electrical Fittings
Universal Beam Clamps Set Screw
NOTE: Do Not
Overtighten
Spring Steel
• Material: Malleable Iron H D
• Finish: Plain (PL),or Electrogalvanized (EG)
1
• Maximum flange thickness of 1- ⁄16" (27mm) RS
B Concrete Inserts
W
Rod Max Load Max Pipe
FLORIDA STRUT VERSABAR WESANCO B L H D
Size (RS) W lbs Size
400 Rooftop Supports
BC810037 -- BC81037 3 ⁄8" – 16 7 3 1
(1.78kN) ⁄8" 1 ⁄8" 2" ⁄2"
4" (22mm) (35mm) (51mm) (13mm)
BC810050 -- BC81050 1 ⁄2" – 13 500 (102mm)
3
BC810062 -- BC81062 5 ⁄8" – 11 (2.22kN) 1 ⁄4" (32mm) 1 ⁄8" (48mm) 2 ⁄8" (60mm) 5 ⁄8" (16mm)
1
7
Opposing style clamps uniform loads are based on being used in pairs, installed against the flanges of the beam. Technical Data
It is recommended that the beam be dimpled at set screw contact location.
www.zsi-foster.com – 157 –
WARNING: Cancer and Reproductive Harm Warning. For more information go to www.P65Warnings.ca.gov.